Compact, hand-held design

Cthulhu AIO Box is designed in a minimalist, neat, hand-held style with dark tones that create a sense of elegance and maturity. The case and body are made of aerospace aluminum, so Cthulhu AIO Box is lightweight, combined with a small shape that makes it convenient to carry.

The internal design with the tank, battery compartment and chip set placed on two different sides helps reduce risks such as essential oil leaking into the battery and causing a short circuit.

Inside the box also comes with a skin sticker designed in the horror style of the company for you to refurbish your device.

High-performance 60W Atom chipset

Not only does it have an eye-catching appearance, the Cthulhu AIO Box is also equipped with a high-end chipset that can push the power up to 60W. All operating modes on the device (VW/VV/TC/TCR/BYPASS) are operated by the Atom chipset with an efficiency of up to 91%.

For user convenience, Cthulhu AIO Box runs on a single 18650 battery, you can charge a spare battery so the device is always ready to use at any time. Cthulhu AIO Box responds to your activities via LED lights and an OLED screen located next to the battery compartment.

Using Boro tank and flexible air vent system

The biggest advantage of the Cthulhu Box AIO is the flexibility of being able to change between pre-installed coils or RTA build decks. The Boro tank with a capacity of up to 6ml ensures you can use the device for the longest possible time.

With the included adapter foot, the Cthulhu Box AIO can immediately use Aspire\’s convenient Nautilus coil line.

In addition, if you are passionate about building coils and want to experiment with different types of coils on the Cthulhu Box AIO, the box also includes a GTA (Genesis Tank) build base for you to freely experience.

And of course, with Boro tank, we cannot ignore the air vents with extremely high customization thanks to the air insert pins with four different sizes.

Instructions for use

Press the fire button 5 times to turn the machine on or off.

The device will automatically enter sleep mode after 60 seconds of inactivity.

How to change mode:

Press the fire button three times within two seconds and press the + or – button to select between modes (VW/VV/TC/TCR/BYPASS)

Battery monitoring:

Red light: Battery level is less than 25%

Green light: Battery level is higher than 25%

Flashing blue light: Burner check

Press the fire button and + at the same time to turn the light on or off.

Common mistakes:

CHECK ATOMIZER: no or not detecting coil/burner: green light flashes 4 times

OHMS TOO LOW: resistance is too low: red light flashes 4 times

LOW POWER: battery voltage is too low, battery is damaged: red light flashes 8 times

CHECK BATTERY: low battery: red light flashes 8 times

TOO HOT: too hot, mainboard temperature over 75 degrees Celsius

Specifications:

Note:

• Product is only for people over 18 years old.
• Keep out of reach of children.